How to dust and clean figures (and what not to do)
Dust figures from top to bottom with a soft makeup brush or paintbrush and a camera air blower. Don't rub them with tissues or wipe them with alcohol or solvents, which damage paint and printed surfaces. A display case out of direct sunlight is the best protection from dust and fading.
What you need
- A soft brush: a makeup brush, paintbrush or anti-static brush
- A camera air blower: blows dust out of small gaps
- Cotton swabs: for hard-to-reach spots
Step by step
- Hold the figure by the base or the body, never by thin parts like hair tips or fingers.
- Blow loose dust off the whole figure.
- Brush away what's left, gently, from top to bottom.
- Use a cotton swab lightly in gaps. Don't scrub.
What not to do
- Rub with tissues or cloths: leaves fine scratches and lint
- Wipe with alcohol, nail-polish remover or thinners: can dissolve or cloud paint and printed surfaces
- Use a hot hair dryer: heat can warp the figure
It depends on the material
Most shop figures are PVC; when very dirty, some collectors wash them in lukewarm water with a little mild detergent. Full-color 3D-printed figures should not be washed. Figmee figures are printed in full-color resin, so clean them with a brush and blower only. See materials and care.
Keeping dust and sun off your display
- Use a case: the most effective dust protection; a small display case or glass dome works for small figures
- Avoid direct sunlight: a shelf away from windows prevents fading
- Keep away from the kitchen: greasy dust is much harder to remove
FAQ
How often should I dust?
Every 2–4 weeks without a case; every few months in a case.
Can yellowing be removed?
Sun discoloration can't be reversed. Keeping figures out of direct sunlight is the best prevention.
Still have a question? Contact us
See your photo as a figure — free
Previews are free and need no account. Order only if you love it.
Try it for free
Figurine
Charm
Magnet
Relief
Vent clip
Tray